Commercial and utility energy storage systems in Vermont
Which codes apply? In Vermont, commercial and utility energy storage systems fall under the 2023 NEC, NFPA 1 in place of the IFC, the 2021 IBC, and the 2020 NFPA 855 through the fire code.
Codes that reach commercial and utility energy storage systems
The edition Vermont enforces for each code that governs the product, and the part of the code that does.
-
NECNational Electrical CodeThe Vermont NEC record2023 NECVerified
in force since Nov 5, 2025
Where it reaches the product. Article 706, with 705 for the interconnection.
2025 Vermont Electrical Safety Rules · Rule 25P023, adopted under 26 V.S.A. § 891
-
IFCInternational Fire CodeThe Vermont IFC recordAnother model codeVerified
Where it reaches the product. Chapter 12, section 1207, and the operational permit.
2025 Vermont Fire & Building Safety Code (NFPA 1 Fire Code) · Rule 25P022, Section 5; 20 V.S.A. § 2731
-
IBCInternational Building CodeThe Vermont IBC record2021 IBCVerified
in force since Nov 4, 2025 · Statewide, with exceptions
Where it reaches the product. Occupancy, construction type, and separation for the building that holds the system.
2025 Vermont Fire & Building Safety Code · Rule 25P022, adopted under 20 V.S.A. §§ 2677, 2731, 2757, 2882
-
NFPA 855NFPA 855, Standard for the Installation of Stationary Energy Storage SystemsThe Vermont NFPA 855 record2020 NFPA 855Verified
in force since Nov 4, 2025 · Through NFPA 1, chapter 52 · Edition derived from the fire code the state adopts
Where it reaches the product. The whole standard: siting, size and separation, fire control, explosion control, and commissioning.
2025 Vermont Fire & Building Safety Code (NFPA 1 Fire Code, 2021 edition) · Rule 25P022; 20 V.S.A. 2731
Vermont laws that name commercial and utility energy storage systems
Statutes, rules, and commission orders are tracked state by state.
No Vermont law or rule on the site names commercial and utility energy storage systems. The product page shows the states that have one.
For information only. Your local building or fire official decides which code applies. We check state records often but can miss a recent change, so confirm with your official before you design, permit, or install. Terms of use